كشاف حائط XF7716 بدون كفاله
K.D 1.95
- Product Code: 3553
- category: Miscellaneous
كشاف حائط XF7716 بدون كفاله
Solar flood light is easy to fix, no need wires, and can be mounted on a wall or pole
Motion sensor light switches to 100% brightness mode in two seconds when motion is detected
Returns to 30% energy saving mode again if people are outside the detected area
K.D
16.5
Easy Installation Solar Searchlight Simple spotlight to illuminate an area without the need for live electrical connections. It's solar powered so it's almost maintenance-free, but it gives off very bright light
Waterproof and effective rainproof
K.D
25
A solar street lamp with one body consists of all the components necessary for the independent operation of LED street lights, due to the internal electronics ensure continuous illumination of the battery fully charged even in the absence of sunlight
Water resistant and you can control it by wireless remote control.
K.D
12.5
Solar floodlight 6 LED panels with a total of 120 COB lights provide lighting suitable for spaces up to 40 square meters.
It lights up when motion is detected and weak light in the absence of motion.
Waterproof and easy to fix
K.D
3.75
Flood light arm all in one
The installation of a wall-mounted column adopts galvanized iron, which has a good effect against rust.
Useful: The design is very useful for installing flexible street light.
Easy to install Simply adjust the screws.
They can be installed on the wall of the building.
K.D
1.75
Outdoor LED floodlight, with rechargeable battery and solar panel. It does not require connection to the electrical network. They are operated completely autonomously, since the internal battery is charged during the day, thanks to the supplied solar panel.
K.D
9.5
400W Solar floodlight
Solar powered for long hours
Remote Control
Basic Electricity Provider
The highest degree of protection from external weather factors, dust - rain and others
More safe in installation and handling
K.D
16.5
High quality components from ST, IR and Infineon, safer and more reliable
Rated current and discharge: 30A
Dual USB output
3-stage intelligent PWM charging
Support 3 charging options: sealed, gel, submerged, power that operates at temperatures from -25 to 55 degrees Celsius
It regulates the electric current coming from the solar panels before it reaches the batteries, which improves the efficiency of the solar system by up to 50%
It prevents the batteries from overcharging, which extends their life and protects them from damage.
It protects the battery from complete discharge, which preserves its storage capacity.
It reduces system maintenance and increases battery lifetime.
It monitors the battery status and displays it on the screen.
It uses MPPT technology that tracks the highest power point and improves conversion efficiency.
K.D
19.5
The controller is designed to control a photovoltaic system consisting of solar panels and consumers.
The electronics of the control unit are protected by an electronic fuse. A built-in LED light displays battery charge information.
The terminals allow easy connection of the PV panel, collector and consumer. Adopt highly efficient controllers
It uses PWM technology to regulate the voltage and improve conversion efficiency
It uses MPPT technology to track the maximum power point and increase the productivity of the solar panels.
It detects the battery voltage automatically and adapts to 12 volt or 24 volt systems.
It protects the battery from overcharging, deep discharge, reverse polarity, and short circuit
It has a LED display that shows the operating status, charging status, and errors.
K.D
35
LCD graphic symbol
system voltage level
automatic identification
PWM intelligent charging mode
Automatic temperature compensation
Adjustable charge and discharge control information Overload, short circuit protection
Remote monitoring and control function (custom)
Battery reverse discharge protection and battery low voltage disconnection
K.D
15.5
60A Positive Ground Charge Controller: Intelligent 3-phase PWM charging
Solar charge regulator built-in LCD screen design, dynamically display all operating data and working conditions
Multiple protections against overcharge, over discharge, overload, reverse polarity, overheat and battery under voltage
K.D
35
Automatic voltage detection
Auto reload
Automatic temperature compensation
Preset information for charging and discharging
Different download control mode
USB output for smartphones and tablets x 2
K.D
32
Solar charge controller solar pv panels
charge discharge regulator
● High efficiency MPPT charging
● MPPT efficiency＞99%, peak conversion efficiency＞97%
● Automatic identification of 12V 24V 48V voltage, 36V can be set as the system constant voltage
● PV input: 150V max
● Multi-stage charging mode
K.D
55
Automatic voltage detection
Auto reload
Automatic temperature compensation
Preset information for charging and discharging, different loading control mode
USB output for smartphones and tablets x 2
K.D
17.5
